With a 5G base station emulation function, a single MT8000A test platform supports both the FR1 (to 7.125 GHz), including band n41, and the FR2 (millimeter-wave) bands used by 5G. Combining it with the OTA Chamber enables both millimeter-wave band RF measurements and beamforming tests using call connections specified by 3GPP. In addition, the intuitive, state-machine-based GUI supports various application tests such as handover tests, quasi-normal and abnormal network tests. Moreover, maximum IP data throughput can be measured for a wide variety of band, CA, and MIMO combinations.

 View    Brochure

RF TRx, Protocol, Application/High Throughput Test Environment Image

Example of Millimeter-wave Band RF/Protocol Test in Combination with RF Chamber

Radio Communication Test Station MT8000A

Shield Box MA8161A

With the Shield Box MA8161A, the MT8000A supports functional tests in FR2 (millimeter-wave) bands.

 Band

n41 (2.5 GHz)

n78-79 (3.5 G/4.5 GHz)

n257 (28 GHz)

n260 (39 GHz)

Example of supported band

Note: Please enquire about other supported bands.

Expanded with the New Hardware Option to a Platform Capable of Supporting FR3 (7.125 GHz to 16 GHz), in Addition to FR1 and FR2

A new RF hardware option has been released that supports the highly anticipated 7.125 GHz to 16 GHz range in the FR3 spectrum (7 GHz to 24 GHz), which is expected to be adopted in 6G. In addition to FR1 and FR2, the single unit expands the platform to support FR3 as well, providing a reliable, long‑term solution from 4G/5G through 6G/FR3.

* For the FR3 band, please contact us for details on the support status and update plans of each application.

Flexible Platform using Modular Architecture

The leading-edge design with flexibility and scalability uses a modular architecture. As well as supporting 4x4 MIMO and 8CA implemented by eMBB (Enhanced Mobile Broadband), it provides a flexible environment for future 5G test requirements, including URLLC (Ultra-Reliable and Low Latency Communications) and mMTC (massive Machine Type Communications)

Supports Existing LTE Test Environment

A comprehensive test environment is provided by making use of Anritsu's LTE test platform offering leading-edge functions based on the company's long experience in this market. Easy configuration of a linked environment for simulating 5G and LTE NSA (non-standalone) makes best use of measurement assets, such as the customer's test environment, test scenarios, etc.

Image of 5G NR NSA Measurement System using Anritsu LTE Measurement Resources

Supports Dynamic Spectrum Sharing (DSS) Condition

In DSS, the spectrum is allocated to both 4G and 5G by the scheduler intelligently, depending on the requirements. This is a much more efficient use of spectrum.

The MT8000A can measure throughput under DSS at several NR/LTE allocation conditions.

Supports 5G NTN Testing

NTN (Non Terrestrial Network) is attracting attention as a technology that enables communication even in areas where conventional networks are difficult, such as mountainous regions, remote islands, and disaster-stricken zones. However, “propagation delay” until radio waves reach the terminal and “Doppler shift,” which causes changes in communication frequency due to satellite movement, are challenges.

MT8000A supports RF and protocol testing under “propagation delay” and “Doppler shift” conditions in 5G NTN environments as defined in 3GPP Release 17 and later.

Supports RedCap Testing

RedCap (Reduced Capability) is a new 5G specification optimized for IoT applications such as industrial sensors, surveillance cameras, and wearable devices, featuring low cost, low power consumption, and compact design.

MT8000A supports RF, protocol and application testing under RedCap conditions as defined in 3GPP Release 17 and later.